ADXL362 Evaluation Boards

By Analog Devices Inc 309

ADXL362 Evaluation Boards

Analog Devices' ADXL362 is an ultra-low power, 3-axis MEMS accelerometer that consumes less than 2 μA at a 100 Hz output data rate and 270 nA when in motion triggered wake-up mode. Unlike accelerometers that use power duty cycling to achieve low power consumption, the ADXL362 does not alias input signals by undersampling; it samples the full bandwidth of the sensor at all data rates.

The ADXL362 always provides 12-bit output resolution; 8-bit formatted data is also provided for more efficient single-byte transfers when a lower resolution is sufficient. Measurement ranges of ±2 g, ±4 g, and ±8 g are available, with a resolution of 1 mg/LSB on the ±2 g range. For applications where a noise level lower than the normal 550 μg/√Hz of the ADXL362 is desired, either of two lower noise modes (down to 175 μg/√Hz typical) can be selected at minimal increase in supply current.

Features Applications
  • Ultra-low power
  • Power can be derived from coin cell battery
  • High resolution: 1 mg/LSB
  • Low noise down to 175 µg/√Hz
  • Measurement ranges selectable via SPI command
  • Wide supply and I/O voltage ranges: 1.6 V to 3.5 V
  • Built-in features for system-level power savings
  • SPI digital interface
  • On-chip temperature sensor
  • Small and thin 3 mm × 3.25 mm × 1.06 mm package
  • Hearing aids
  • Home healthcare devices
  • Motion enabled power save switches
  • Wireless sensors
  • Motion enabled metering devices

카테고리

Top