Trenz Electronics' Red Pitaya STEMLab starter kits contain everything needed to start developing with the Red Pitaya STEMLab 125-10 or 125-14 boards.
By Trenz Electronic 649
Trenz Electronic's TE0726 Rasberry Pi compatible FPGA module's commercial operating temperature range depends on customer design and cooling solution.
By Trenz Electronic 145
Trenz Electronic's DIPFORTy1 "Soft Propeller" has 16 MByte of Flash used for configuration and everything fits on a Propeller-compatible DIP 40 pinout.
By Trenz Electronic 136
The Trenz Electronic TE0720 is a predominantly industrial-grade SoC module integrating a Xilinx Zynq Z-7020 SoC, a Gb Ethernet transceiver, 8 Gb (1 GB) DDR3 SDRAM.
By Trenz Electronic 120
Trenz Electronic's TE0715 series with Zynq Z-7015 or Z-7030 is a standard 4 x 5 cm standard footprint SoC module designed for digital signal processing, data acquisition, test and measurement
By Trenz Electronic 197
The Trenz Electronic carrier boards are providing functionality for testing, evaluation and development purposes of 4 cm x 5 cm Trenz Electronic SoMs.
By Trenz Electronic 208
Trenz Electronic's TE0728 module socket with Xilinx automotive Zynq®-7020 provides a number of configurable I/Os via rugged high-speed stacking strips.
By Trenz Electronic 117
Trenz Electronic's ArduZynq is an Arduino compatible module integrating a Xilinx Z-7000, 512 MB DDR3L, 16 MB Flash, USB OTG, on-board USB JTAG, and UART.
By Trenz Electronic 129
Trenz Electronic's TE0729 is an industrial-grade SoM (system on module) based on Xilinx Zynq®-7000 SoC (system on chip).
By Trenz Electronic 142
Trenz Electronic's TE0782 high-performance, industrial-grade SoM with industrial temp range from is based on the Xilinx Zynq®-7000 SoC (Z-7035/Z-7045/Z-7100).
By Trenz Electronic 126
The industrial-grade TE0745 module from Trenz combines a Xilinx Zynq® SoC (XC7Z-030, XC7Z-035 or XC7Z-045), 1 GByte DDR3/L SDRAM, and 32 MByte SPI Flash memory.
By Trenz Electronic 106
Trenz's icoBoard is pin-compatible with the Raspberry Pi 2B and all versions and any board using the same pinout.
By Trenz Electronic 254
TE0714 series FPGA modules from Trenz integrate a Xilinx Artix-7, 16 MByte Flash memory for configuration, operation, and powerful switch-mode power supplies.
By Trenz Electronic 128
Trenz Electronic's TE0841 series is designed for advanced driver assistance systems, broadcast cameras, motion control, and public/military mobile radios.
By Trenz Electronic 308
Trenz Electronic's TE0741 integrates a Xilinx Kintex®-7 FPGA, eight multi-gigabit transceivers, 32 MB Flash memory, and powerful switch-mode power supplies.
By Trenz Electronic 329
Trenz Electronic’s TE0712 is an industrial-grade FPGA module integrating a Xilinx Artix®-7 FPGA for configuration and operation.
By Trenz Electronic 170
Trenz Electronic’s TE0725 are low-cost, small-sized FPGA modules integrating Xilinx Artix®-7 for configuration and operation.
By Trenz Electronic 193