TPS2310IPW

Mfr. #:: TPS2310IPW
설명:: Hot Swap Voltage Controllers 3-13V Dual w/Intrdpt Chl Circuit Breaking
수명 주기:: 이 제조업체의 새 제품입니다.
데이터 시트:: TPS2310IPW 데이터 시트
배달:: DHL FedEx Ups TNT EMS
지불:: T/T Paypal Visa MoneyGram Western Union
ECAD Model:
추가 정보:: TPS2310IPW 추가 정보 TPS2310IPW Product Details

제품 속성
속성 값

제조사:: 텍사스 인스트루먼트

제품 카테고리:: 핫 스왑 전압 컨트롤러

RoHS:: Y

제품:: 컨트롤러 및 스위치

공급 전압 - 최대:: 13 V

공급 전압 - 최소:: 3 V

채널 수:: 2 Channel

작동 공급 전류:: 5 uA

최소 작동 온도:: - 40 C

최대 작동 온도:: + 85 C

장착 스타일:: SMD/SMT

패키지/케이스:: TSSOP-20

포장:: 튜브

작동 온도 범위:: - 40 C to + 85 C

시리즈:: TPS2310

유형:: 양의 전압

상표:: 텍사스 인스트루먼트

작동 공급 전압:: 3 V to 13 V

Pd - 전력 손실:: 1015 mW

상품 유형:: 핫 스왑 전압 컨트롤러

공장 팩 수량:: 70

하위 카테고리:: PMIC - 전원 관리 IC

단위 무게:: 0.002716 oz

Tags: TPS2310, TPS231, TPS23, TPS2, TPS

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

TPS2310IPW 평가 및 리뷰

Z***s

Thanks,

2019-07-06

A***n

Okay.

2019-06-17

TPS2310IPW 설명

***ical: Hot Swap Controller 2-CH 5.5V/13V N-Channel Positive Voltage 20-Pin TSSOP Tube

***ser: Hot Swap and Power Distribution 3-13V Dual w/Intrdpt Chl Circuit Breaking

***as Instruments: 3-V-13-V dual channel hot swap with interdependent channel circuit breaking and active low enable 20-TSSOP -40 to 85

***ark: Hot Swap Controller IC; Applications:Hot-Swap / Plug / Dock Power Management, Hot-Plug PCI, Device Bay, Electronic Circuit Breaker; Supply Voltage Range:3V to 13V; Digital IC Case Style:TSSOP; No. of Pins:20 ;RoHS Compliant: Yes

***AS INS: The TPS2310 and TPS2311 are dual-channel hot-swap controllers that use external N-channel MOSFETs as high-side switches in power applications. Features of these devices, such as overcurrent protection (OCP), inrush current control, output-power status reporting, and the ability to discriminate between load transients and faults, are critical requirements for hot-swap applications.

***ASIN: The TPS2310/11 devices incorporate undervoltage lockout (UVLO) and power-good (PG) reporting to ensure the device is off at start-up and confirm the status of the output voltage rails during operation. Each internal charge pump, capable of driving multiple MOSFETs, provides enough gate-drive voltage to fully enhance the N-channel MOSFETs. The charge pumps control both the rise times and fall times (dv/dt) of the MOSFETs, reducing power transients during power up/down. The circuit-breaker functionality combines the ability to sense overcurrent conditions with a timer function; this allows designs such as DSPs, that may have high peak currents during power-state transitions, to disregard transients for a programmable period.

***TEXAS: DISCH1, DISCH2 – DISCH1 and DISCH2 should be connected to the sources of the external N-channel MOSFET transistors connected to GATE1 and GATE2, respectively. These pins discharge the loads when the MOSFET transistors are disabled. They also serve as reference-voltage connections for internal gate voltage-clamp circuitry.

***AS INSTRUMENTS INC: ENABLE or ENABLE – ENABLE for TPS2310 is active-low. ENABLE for TPS2311 is active-high. When the controller is enabled, both GATE1 and GATE2 voltages will power up to turn on the external MOSFETs. When the ENABLE pin is pulled high for TPS2310 or the ENABLE pin is pulled low for TPS2311 for more than 50 µs, the gate of the MOSFET is discharged at a controlled rate by a current source, and a transistor is enabled to discharge the output bulk capacitance. In addition, the device turns on the internal regulator PREREG (see VREG) when enabled and shuts down PREREG when disabled so that total supply current is less than 5 µA.

***AS INSTUMENTS: FAULT – FAULT is an open-drain overcurrent flag output. When an overcurrent condition in either channel is sustained long enough to charge TIMER to 0.5 V, both channels latch off and pull this pin low. In order to turn the device back on, either the enable pin has to be toggled or the input power has to be cycled.

***: GATE1, GATE2 – GATE1 and GATE2 connect to the gates of external N-channel MOSFET transistors. When the device is enabled, internal charge-pump circuitry pulls these pins up by sourcing approximately 15 µA to each. The turnon slew rates depend upon the capacitance present at the GATE1 and GATE2 terminals. If desired, the turnon slew rates can be further reduced by connecting capacitors between these pins and ground. These capacitors also reduce inrush current and protect the device from false overcurrent triggering during powerup. The charge-pump circuitry generates gate-to-source voltages of 9 V–12 V across the external MOSFET transistors.

***AS INSTRUMENTS INCORPORATED: IN1, IN2 – IN1 and IN2 should be connected to the power sources driving the external N-channel MOSFET transistors connected to GATE1 and GATE2, respectively. The TPS2310/TPS2311 draws its operating current from IN1, and both channels remains disabled until the IN1 power supply has been established. The IN1 channel has been constructed to support 3-V, 5-V, or 12-V operation, while the IN2 channel has been constructed to support 3-V or 5-V operation

***AS INSTRU: ISENSE1, ISENSE2, ISET1, ISET2 – ISENSE1 and ISENSE2, in combination with ISET1 and ISET2, implement overcurrent sensing for GATE1 and GATE2. ISET1 and ISET2 set the magnitude of the current that generates an overcurrent fault, through external resistors connected to ISET1 and ISET2. An internal current source draws 50 µA from ISET1 and ISET2. With a sense resistor from IN1 to ISENSE1 or from IN2 to ISENSE2, which is also connected to the drains of external MOSFETs, the voltage on the sense resistor reflects the load current. An overcurrent condition is assumed to exist if ISENSE1 is pulled below ISET1 or if ISENSE2 is pulled below ISET2. To ensure proper circuit breaker operation, VI(ISENSE1) and VI(ISET1) should never exceed VI(IN1). Similarly, VI(ISENSE2) and VI(ISET2) should never exceed VI(IN2).

***as Instruments Inc.: PWRGD1, PWRGD2 – PWRGD1 and PWRGD2 signal the presence of undervoltage conditions on VSENSE1 and VSENSE2, respectively. These pins are open-drain outputs and are pulled low during an undervoltage condition. To minimize erroneous PWRGDx responses from transients on the voltage rail, the voltage sense circuit incorporates a 20-µs deglitch filter. When VSENSEx is lower than the reference voltage (about 1.23 V), PWRGDx is active low to indicate an undervoltage condition on the power-rail voltage. PWRGDx may not correctly report power conditions when the device is disabled, because there is no gate drive power for the PWRGD output transistor in the disable mode, or, in other words, PWRGD is floating. Therefore, PWRGD is pulled up to its pullup power supply rail in disable mode.

***AS INSRUMENT: TIMER – A capacitor on TIMER sets the time during which the power switch can be in overcurrent before turning off. When the overcurrent protection circuits sense an excessive current, a current source is enabled which charges the capacitor on TIMER. Once the voltage on TIMER reaches approximately 0.5 V, the circuit-breaker latch is set and the power switch is latched off. Power must be recycled or the ENABLE pin must be toggled to restart the controller. In high-power or high-temperature applications, a minimum 50-pF capacitor is strongly recommended from TIMER to ground, to prevent any false triggering.

***AS: VREG – VREG is the output of an internal low-dropout voltage regulator, where IN1 is the input. The regulator is used to generate a regulated voltage source, less than 5.5 V, for the device. A 0.1-µF ceramic capacitor should be connected between VREG and ground to aid in noise rejection. In this configuration, upon disabling the device, the internal low-dropout regulator will also be disabled, which removes power from the internal circuitry and allows the device to be placed in low-quiescent-current mode. In applications where IN1 is less than 5.5 V, VREG and IN1 may be connected together. However, under these conditions, disabling the device does not place the device in low-quiescent-current mode, because the internal low-dropout voltage regulator is being bypassed, thereby keeping internal circuitry operational. If VREG and IN1 are connected together, a 0.1-µF ceramic capacitor between VREG and ground is not needed if IN1 already has a bypass capacitor of 1 µF to 10 µF.

***AS INSRUMENT: VSENSE1, VSENSE2 – VSENSE1 and VSENSE2 can be used to detect undervoltage conditions on external circuitry. If VSENSE1 senses a voltage below approximately 1.23 V, PWRGD1 is pulled low. Similarly, a voltage less than 1.23 V on VSENSE2 causes PWRGD2 to be pulled low.

Market price

부분 #	설명	재고	가격
TPS2310IPW DISTI # 32414265	Hot Swap Controller 2-CH 5.5V/13V N-Channel Positive Voltage 20-Pin TSSOP Tube	4410	2500:$1.9800 1000:$1.9980 500:$2.3670 250:$2.6100 210:$2.7810
TPS2310IPW DISTI # 296-2321-5-ND	IC DUAL HOTSWAP PWR CONT 20TSSOP RoHS: Compliant Min Qty: 1 Container: Tube	401In Stock	2520:$2.1067 1050:$2.2176 560:$2.6294 140:$3.0888 70:$3.5640 10:$3.7700 1:$4.2000
TPS2310IPWR DISTI # TPS2310IPWR-ND	IC DUAL HOTSWAP PWR CONT 20TSSOP RoHS: Compliant Min Qty: 2000 Container: Tape & Reel (TR)	Limited Supply - Call
TPS2310IPWG4 DISTI # TPS2310IPWG4-ND	IC DUAL HOTSWAP PWR CONT 20TSSOP RoHS: Compliant Min Qty: 210 Container: Tube	Temporarily Out of Stock	210:$3.0888
TPS2310IPW DISTI # V39:1801_07412605	Hot Swap Controller 2-CH 5.5V/13V N-Channel Positive Voltage 20-Pin TSSOP Tube	0
TPS2310IPW DISTI # TPS2310IPW	Hot Swap Controller 2-CH 5.5V/13V 20-Pin TSSOP Tube - Rail/Tube (Alt: TPS2310IPW) RoHS: Compliant Min Qty: 210 Container: Tube	Americas - 0	210:$2.1900 350:$2.0900 560:$2.0900 1050:$1.9900 2100:$1.8900
TPS2310IPW DISTI # TPS2310IPW	Hot Swap Controller 2-CH 5.5V/13V 20-Pin TSSOP Tube (Alt: TPS2310IPW) RoHS: Compliant Min Qty: 70 Container: Tube	Europe - 0	70:€2.6900 140:€2.2900 280:€2.0900 420:€1.9900 700:€1.8900
TPS2310IPWR DISTI # TPS2310IPWR	Hot Swap Controller 2-CH 5.5V/13V 20-Pin TSSOP T/R (Alt: TPS2310IPWR) RoHS: Compliant Min Qty: 2000 Container: Tape and Reel	Europe - 0	2000:€2.4900 4000:€2.1900 8000:€1.9900 12000:€1.8900 20000:€1.7900
TPS2310IPWG4 DISTI # TPS2310IPWG4	Hot Swap Controller 2-CH 5.5V/13V 20-Pin TSSOP Tube - Rail/Tube (Alt: TPS2310IPWG4) RoHS: Compliant Min Qty: 210 Container: Tube	Americas - 0	210:$2.1900 350:$2.0900 560:$2.0900 1050:$1.9900 2100:$1.8900
TPS2310IPW	3-13V Dual HotSwap IC w/ Inter-dependent Channel Circuit Breaking & Pwr Good Report, Act-Low Enable	4200	1000:$1.8000 750:$1.8900 500:$2.2300 250:$2.6300 100:$2.8000 25:$3.2000 10:$3.4400 1:$3.8200
TPS2310IPW DISTI # 595-TPS2310IPW	Hot Swap Voltage Controllers 3-13V Dual w/Intrdpt Chl Circuit Breaking RoHS: Compliant	208	1:$4.1900 10:$3.7700 100:$3.0800 250:$2.8900 500:$2.6300 1000:$2.2100 2500:$2.1000
TPS2310IPWG4 DISTI # 595-TPS2310IPWG4	Hot Swap Voltage Controllers 3-13V Dual w/Intrdpt Chl Circuit Breaking RoHS: Compliant	0	210:$3.0800 280:$2.8900 560:$2.6300 1050:$2.2100 2520:$2.1000
TPS2310IPWR DISTI # 595-TPS2310IPWR	Hot Swap Voltage Controllers 3-13V Dual w/Intrdpt Chl Circuit Breaking RoHS: Compliant	0
TPS2310IPWRG4 DISTI # 595-TPS2310IPWRG4	Hot Swap Voltage Controllers 3-13V Dual w/Intrdpt Chl Circuit Breaking RoHS: Compliant	0
TPS2310IPW	Power Supply Support Circuit, Adjustable, 2 Channel, PDSO20 RoHS: Compliant	7025	1000:$2.0800 500:$2.1900 100:$2.2800 25:$2.3800 1:$2.5600
TPS2310IPWR	Power Supply Support Circuit, Adjustable, 2 Channel, PDSO20 RoHS: Compliant	32000	1000:$2.1700 500:$2.2900 100:$2.3800 25:$2.4800 1:$2.6700

영상	부분 #	설명
	Mfr.#: LAN8710A-EZK OMO.#: OMO-LAN8710A-EZK	Ethernet ICs 10/100 Ethernet XCVR w/HPAutoMDIX FlexPwr
	Mfr.#: TMS320C6746EZWTA3 OMO.#: OMO-TMS320C6746EZWTA3	Digital Signal Processors & Controllers - DSP, DSC Fixed/Floating Pnt Dgtl Sigl Processor
	Mfr.#: 10M02SCU169I7G OMO.#: OMO-10M02SCU169I7G	FPGA - Field Programmable Gate Array non-volatile FPGA, 130 I/O, 169UBGA
	Mfr.#: FDV301N OMO.#: OMO-FDV301N	MOSFET N-Ch Digital
	Mfr.#: TXB0106IPWRQ1 OMO.#: OMO-TXB0106IPWRQ1	Translation - Voltage Levels AC 6B Bidirectional
	Mfr.#: RC0402FR-07100KL OMO.#: OMO-RC0402FR-07100KL	Thick Film Resistors - SMD 100K OHM 1%
	Mfr.#: TPS2330EVM-184 OMO.#: OMO-TPS2330EVM-184-TEXAS-INSTRUMENTS	TPS2330 Hot Swap Controller Evaluation Board
	Mfr.#: 10M02SCU169I7G OMO.#: OMO-10M02SCU169I7G-INTEL	IC FPGA 130 I/O 169UBGA MAX 10
	Mfr.#: LAN8710A-EZK OMO.#: OMO-LAN8710A-EZK-MICROCHIP-TECHNOLOGY	IC TXRX ETHERNET 32QFN
	Mfr.#: TMS320C6746EZWTA3 OMO.#: OMO-TMS320C6746EZWTA3-TEXAS-INSTRUMENTS	Digital Signal Processors & Controllers - DSP, DSC Fixed/Floating Pnt Dgtl Sigl Processo

TPS2310IPW

Step1:Vacuum Packaging with PL

Step2:Anti-Static Bag

Step3:Packaging Boxes

Z***s

A***n

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes