ATmega128L is an 8-bit series of microcontrollers from ATMEL. It is the highest configuration of ATMEL's 8-bit series of microcontrollers.
By ATMEGA 46
Although TDA7377 and TDA7388 are both audio power amplifier chips produced by STMicroelectronics, they have obvious differences in channel configuration, output power and application range.
By STMicroelectronics 53
SS14 is a Schottky diode, also known as Schottky barrier diode or fast recovery diode.
By ON Semiconductor / Fairchild 61
The LM339 is an integrated circuit (IC), also commonly known as a comparator.
By TI 68
The 2N3055 is a bipolar transistor used in power amplification and switching applications.
By Central Semiconductor 95
The PC817 is an Optocoupler or Optoisolator device, also known as an optocoupler isolator.
By Sharp Microelectronics 134
SG3525 is an integrated circuit chip commonly used to design and control switching power supply systems, especially for DC to AC inverter applications.
By STMicroelectronics 86
CR2450 and CR2032 are CR family series of non-rechargeable button batteries, and both are members of the CR family.
By Panasonic 130
The LD1117S33TR is a low dropout linear voltage regulator commonly used in power management applications to provide stable output voltage.
By STMicroelectronics 86
SN6505BDBVR is an isolated driver chip produced by Texas Instruments, usually used for isolated power transmission or signal isolation applications.
By Texas Instruments 103
LMD18200T is an integrated circuit chip produced by Texas Instruments, mainly used as Motor Driver or Current Amplifier.
By Texas Instruments 104
The ATMEGA328-PU is a microcontroller chip produced by Atmel (now Microchip Technology).
By Microchip Technology / Atmel 110
TOP245YN is a switching power supply control integrated circuit (IC),
By Power Integrations 124
S8050 is an NPN type transistor used in low-power electronic circuits, especially in amplifiers, switchers, and linear applications.
By Abracon Corporation 257
The paired cable adopts the balanced transmission method.
By Belden Wire 107
A multi-conductor cable is a cable that consists of multiple conductors, usually metallic wires.
By TE Connectivity 140
Wire and cable management refers to a set of practices and strategies for planning, installing, labeling, maintaining and managing wire and cable systems in a variety of buildings.
By TE Connectivity 138
Safety issues in wire and cable management cover a range of risks associated with electrical equipment and systems.
By Raychem 156
In the industrial field, wire and cable management is very important, it involves the layout, installation, maintenance and safety of electrical equipment.
By TE Connectivity 134
Wire and cable management refers to the process of planning, organizing, laying out and maintaining all kinds of wires, cables and connecting equipment.
By Panduit 165