TLK1201AI

Mfr. #:: TLK1201AI
제조사:: Texas Instruments
설명:
수명 주기:: 이 제조업체의 새 제품입니다.
데이터 시트:: TLK1201AI 데이터 시트
배달:: DHL FedEx Ups TNT EMS
지불:: T/T Paypal Visa MoneyGram Western Union
ECAD Model:

제품 속성
속성 값

제조사: 텍사스 인스트루먼트

제품 카테고리: 인터페이스 - 드라이버, 수신기, 트랜시버

시리즈: TLK1201AI

제품: 이더넷 트랜시버

유형: 트랜시버

포장: 트레이 대체 포장

단위 무게: 0.008004 oz

장착 스타일: SMD/SMT

패키지 케이스: HVQFP-64

작동 온도: -40°C ~ 85°C

장착형: 표면 실장

전압 공급: 2.3 V ~ 2.7 V

공급자-장치-패키지: 64-HVQFP

규약: IEEE 802.3

데이터 속도: 1.3 Gb/s

드라이버 수-수신기: 2016/1/1

듀플렉스: 가득한

수신기 히스테리시스: -

최대 작동 온도: + 85 C

최소 작동 온도: - 40 C

작동-공급-전압: 2.5 V

공급 전류 최대: 90 mA

공급 전압 최대: 2.7 V

공급 전압 최소: 2.3 V

트랜시버 수: 1 Transceiver

Tags: TLK1201AI, TLK1201A, TLK120, TLK12, TLK1, TLK

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

TLK1201AI 설명

***th Star Micro: the tlk1201a/tlk1201ai gigabit ethernet transceiver provides for ultrahigh-speed full-duplex point-to-point data transmissions. this device is based on the timing requirements of the 10-bit interface specification by the ieee 802.3 gigabit ethernet specification and is also compliant with the ansi x3.230-1994 (fc-ph) fibre channel standard. the device supports data rates from 0.6 gbps to 1.3 gbps. the primary application of the transceiver is to provide building blocks for point-to-point baseband data transmission over controlled impedance media of 50 . the transmission media can be printed-circuit board traces copper cables or fiber-optical media. the ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment. view all in datasheet

***as Instruments: The TLK1201A/TLK1201AI gigabit ethernet transceiver provides for ultrahigh-speed, full-duplex, point-to-point data transmissions. This device is based on the timing requirements of the 10-bit interface specification by the IEEE 802.3 gigabit ethernet specification and is also compliant with the ANSI X3.230-1994 (FC-PH) fibre channel standard. The device supports data rates from 0.6 Gbps to 1.3 Gbps.The primary application of the transceiver is to provide building blocks for point-to-point baseband data transmission over controlled impedance media of 50 or 75 . The transmission media can be printed-circuit board traces, copper cables, or fiber-optical media. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment. The transceiver performs the data serialization, deserialization, and clock extraction functions for a physical layer interface device. The transceiver operates at 1.25 Gbps (typical), providing up to 1 Gbps of data bandwidth over a copper or optical media interface. The transceiver supports both the defined 10-bit interface (TBI) and a reduced 5-bit interface utilizing double data rate (DDR) clocking. In the TBI mode the serializer/deserializer (SERDES) accepts 10-bit wide 8b/10b parallel encoded data bytes. The parallel data bytes are serialized and transmitted differentially at PECL compatible voltage levels. The SERDES extracts clock information from the input serial stream and deserializes the data, outputting a parallel 10-bit data byte. In the DDR mode the parallel interface accepts 5-bit wide 8b/10b encoded data aligned on both the rising and falling edges of the reference clock. The data is clocked most significant bit first (bits 0-4 of the 8b/10b encoded data) on the rising edge of the clock and the least significant bits (bits 5-9 of the 8b/10b encoded data) are clocked on the falling edge of the clock. The transceiver provides a comprehensive series of built-in tests for self-test purposes including loopback and pseudorandom binary sequence (PRBS) generation and verification. An IEEE 1149.1 JTAG port is also supported. The transceiver is housed in a high-performance, thermally enhanced, 64-pin VQFP PowerPAD package. Use of the PowerPAD package does not require any special considerations except to note that the PowerPAD, which is an exposed die pad on the bottom of the device, is a metallic thermal and electrical conductor. It is recommended that the device PowerPAD be soldered to the thermal land on the board. The transceiver is characterized for operation from 0C to 70C (TLK1201A) or -40C to 85C (TLK1201AI). The transceiver uses a 2.5-V supply. The I/O section is 3.3-V compatible. With a 2.5-V supply the chipset is very power-efficient, dissipating less than 200 mW typical power when operating at 1.25 Gbps. The transceiver is designed to be hot plug capable. A power-on reset causes RBC0, RBC1, the parallel output signal terminals, TXP, and TXN to be held in a high-impedance state.

Market price

부분 #	제조	설명	재고	가격
TLK1201AIRCP DISTI # 296-18299-ND	Texas Instruments	IC ETHERNET TXRX 64-HVQFP RoHS: Compliant Min Qty: 160 Container: Tray	Limited Supply - Call
TLK1201AIRCPG4 DISTI # TLK1201AIRCPG4-ND	Texas Instruments	IC ETHERNET TXRX 64-HVQFP RoHS: Compliant Min Qty: 160 Container: Tray	Limited Supply - Call
TLK1201AIRCPR DISTI # TLK1201AIRCPR-ND	Texas Instruments	IC ETHERNET TXRX 64-HVQFP RoHS: Compliant Min Qty: 1000 Container: Tape & Reel (TR)	Limited Supply - Call
TLK1201AIRCPRG4 DISTI # TLK1201AIRCPRG4-ND	Texas Instruments	IC ETHERNET TXRX 64-HVQFP RoHS: Compliant Min Qty: 1000 Container: Tape & Reel (TR)	Limited Supply - Call
TLK1201AIRCP	Texas Instruments	Ethernet Transceiver, 1-Trnsvr, CMOS, PQFP64 RoHS: Compliant	12799	1000:$7.8300 500:$8.2400 100:$8.5800 25:$8.9500 1:$9.6400
TLK1201AIRCPR	Texas Instruments	Ethernet Transceiver, 1-Trnsvr, CMOS, PQFP64 RoHS: Compliant	2538	1000:$8.0700 500:$8.4900 100:$8.8400 25:$9.2200 1:$9.9300
TLK1201AIRCPG4	Texas Instruments	Ethernet Transceiver, 1-Trnsvr, CMOS, PQFP64 RoHS: Compliant	150	1000:$6.4500 500:$6.7900 100:$7.0700 25:$7.3700 1:$7.9400
TLK1201AIRCP DISTI # 595-TLK1201AIRCP	Texas Instruments	Ethernet ICs Gbps Ethernet Trncvr W/Half Rate Option RoHS: Compliant	52	1:$12.4300 10:$11.4300 25:$10.8400 50:$10.5400 100:$9.5900 250:$9.1300 500:$8.5500 1000:$7.4800
TLK1201AIRCPG4 DISTI # 595-TLK1201AIRCPG4	Texas Instruments	Ethernet ICs Gbps Ethernet Trncvr W/Half Rate Option RoHS: Compliant	0
TLK1201AIRCPR DISTI # 595-TLK1201AIRCPR	Texas Instruments	Ethernet ICs Gbps Ethernet Trncvr W/Half Rate Option RoHS: Compliant	0
TLK1201AIRCPRG4 DISTI # 595-TLK1201AIRCPRG4	Texas Instruments	Ethernet ICs Gbps Ethernet Trncvr W/Half Rate Option RoHS: Compliant	0
TLK1201AIRCP	Texas Instruments		23
TLK1201AIRCP	Texas Instruments	DATACOM, ETHERNET TRANSCEIVER, PQFP64	179	73:$6.4350 28:$6.9300 1:$14.8500
TLK1201AIRCPR	106	INSTOCK	3576
TLK1201AIRCPR	Texas Instruments	INSTOCK	3586
TLK1201AIRCP DISTI # 1576961	Texas Instruments	IC, ETHERNET TXRX, 1.3GBPS, HVQFP-64 RoHS: Compliant	0	160:£8.0600 320:£7.4600 640:£7.0700

영상	부분 #	설명
	Mfr.#: TLK100PHP OMO.#: OMO-TLK100PHP	Ethernet ICs Industrl Ethrnet PHY
	Mfr.#: TLK1201AIRCP OMO.#: OMO-TLK1201AIRCP	Ethernet ICs Gbps Ethernet Trncvr W/Half Rate Option
	Mfr.#: TLK1201ARCPRG4 OMO.#: OMO-TLK1201ARCPRG4	Ethernet ICs Gbps Ethernet Trncvr W/Half Rate Option
	Mfr.#: TLK10081CTR OMO.#: OMO-TLK10081CTR-TEXAS-INSTRUMENTS	Serializers & Deserializers - Serdes 10Gbps 1-8 CH Multi- Rate Link Aggregato
	Mfr.#: TLK10002EVM OMO.#: OMO-TLK10002EVM-TEXAS-INSTRUMENTS	EVAL MODULE FOR TLK10002
	Mfr.#: TLK10022 OMO.#: OMO-TLK10022-1190	신규 및 오리지널
	Mfr.#: TLK1002ARGERG4.. OMO.#: OMO-TLK1002ARGERG4--1190	신규 및 오리지널
	Mfr.#: TLK1102ERGERG4 OMO.#: OMO-TLK1102ERGERG4-1190	신규 및 오리지널
	Mfr.#: TLK1201 OMO.#: OMO-TLK1201-1190	신규 및 오리지널
	Mfr.#: TLK1201RCPRG4 OMO.#: OMO-TLK1201RCPRG4-1190	신규 및 오리지널

TLK1201AI

Step1:Vacuum Packaging with PL

Step2:Anti-Static Bag

Step3:Packaging Boxes

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes