OMO ElectronicOMO Electronic
Expand menu
0 카트

ADM485JR-REEL

ADM485JR-REEL
Mfr. #:
ADM485JR-REEL
제조사:
Rochester Electronics, LLC
설명:
수명 주기:
이 제조업체의 새 제품입니다.
데이터 시트:
ADM485JR-REEL 데이터 시트
배달:
DHL FedEx Ups TNT EMS
지불:
T/T Paypal Visa MoneyGram Western Union
ECAD Model:
제품 속성
속성 값
제조사
ADI
제품 카테고리
IC 칩
Tags
ADM485JR-R, ADM485JR, ADM485J, ADM485, ADM48, ADM4, ADM
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
***i-Key
IC TX/RX SINGLE RS-485 5V 8SOIC
***icontronic
Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
*** Americas
TRANSCEIVER RS-485 I/F TRANSCEIVER
***log Devices
The ADM485 is a differential line transceiver suitable for high speed bidirectional data communication on multipoint bus transmission lines. It is designed for balanced data transmission and complies with both EIA Standards RS-485 and RS-422. The part contains a differential line driver and a differential line receiver. Both the driver and the receiver may be enabled independently. When disabled, the outputs are tristated. The ADM485 operates from a single +5 V power supply. Excessive power dissipation caused by bus contention or by output shorting is prevented by a thermal shutdown circuit. This feature forces the driver output into a high impedance state if during fault conditions a significant temperature increase is detected in the internal driver circuitry. Up to 32 transceivers may be connected simultaneously on a bus, but only one driver should be enabled at any time. It is important, therefore, that the remaining disabled drivers do not load the bus. To ensure this, the ADM485 driver features high output impedance when disabled and also when powered down. This minimizes the loading effect when the transceiver is not being utilized. The high impedance driver output is maintained over the entire common-mode voltage range form -7V to +12 V. The receiver contains a fail safe feature which results in a logic high output state if the inputs are unconnected (floating). The ADM485 is fabricated on BiCMOS, an advanced mixed technology process combining low power CMOS with fast switching bipolar technology. All inputs and outputs contain protection against EDS; all diver outputs feature high source and sink current capability. An epitaxial layer is used to guard against latch-up. The ADM485 features extremely fast switching speeds. Minimal driver propagation delays permit transmission at data rates up to 5 Mbits/s while low skew minimizes EMI interference. The part is fully specified over the commercial and industrial temperature range and is available in an 8-pin DIL/SOIC packages.
***roFlash
Single Transmitter/Receiver RS-422/RS-485 8-Pin SOIC N
***el Electronic
5 V, Low Power, 5 Mbps, Half Duplex EIA RS-485 Transceiver
***i-Key
IC TX/RX SINGLE RS-485 5V 8SOIC
***S.I.T. Europe - USA - Asia
Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
***ical
Line Transceiver 1TR 1TX 1RX 8-Pin SOIC N
*** Americas
Transceiver RS-485 I/F TRANSCEIVER
***S
French Electronic Distributor since 1988
***log Devices
The ADM485 is a differential line transceiver suitable for high speed bidirectional data communication on multipoint bus transmission lines. It is designed for balanced data transmission and complies with both EIA Standards RS-485 and RS-422. The part contains a differential line driver and a differential line receiver. Both the driver and the receiver may be enabled independently. When disabled, the outputs are tristated. The ADM485 operates from a single +5 V power supply. Excessive power dissipation caused by bus contention or by output shorting is prevented by a thermal shutdown circuit. This feature forces the driver output into a high impedance state if during fault conditions a significant temperature increase is detected in the internal driver circuitry. Up to 32 transceivers may be connected simultaneously on a bus, but only one driver should be enabled at any time. It is important, therefore, that the remaining disabled drivers do not load the bus. To ensure this, the ADM485 driver features high output impedance when disabled and also when powered down. This minimizes the loading effect when the transceiver is not being utilized. The high impedance driver output is maintained over the entire common-mode voltage range form -7V to +12 V. The receiver contains a fail safe feature which results in a logic high output state if the inputs are unconnected (floating). The ADM485 is fabricated on BiCMOS, an advanced mixed technology process combining low power CMOS with fast switching bipolar technology. All inputs and outputs contain protection against EDS; all diver outputs feature high source and sink current capability. An epitaxial layer is used to guard against latch-up. The ADM485 features extremely fast switching speeds. Minimal driver propagation delays permit transmission at data rates up to 5 Mbits/s while low skew minimizes EMI interference. The part is fully specified over the commercial and industrial temperature range and is available in an 8-pin DIL/SOIC packages.
***th Star Micro
Single Transmitter/Receiver RS-422/RS-485 8-Pin SOIC N T/R
***nell
TRANSCEIVER, RS422/RS485, SOIC-8; Type de circuit: Émetteur-récepteur RS422 / RS485; Type d'interface CI: RS422, RS485; Nombre de drivers: 1Driver(s); Nombre de récepteurs: 1Receivers; Tension, alimentation min.: 4.75V; Tensi
***ment14 APAC
TRANSCEIVER, RS422/RS485, SOIC-8; Device Type:RS422 / RS485 Transceiver; IC Interface Type:RS422, RS485; No. of Drivers:1Drivers; No. of Receivers:1Receivers; Supply Voltage Min:4.75V; Supply Voltage Max:5.25V; Driver Case Style:SOIC; No. of Pins:8Pins; Operating Temperature Min:0°C; Operating Temperature Max:70°C; Product Range:-; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (15-Jan-2019)
***el Electronic
5 V, ⅛ Load, Slew-Rate Limited, RS-485/RS-422 Transceiver (Half Duplex, 500 kbps)
***et
Single Transmitter/Receiver RS-485 8-Pin SOIC N
***log Devices
The ADM4850 / ADM4851 / ADM4852 / ADM4853 / ADM4854 / ADM4855 / ADM4856 / ADM4857 are differential line transceivers suitable for high speed, half-duplex and full duplex data communication on multipoint bus transmission lines. They are designed for balanced data transmission and comply with EIA Standards RS-485 and RS-422. The ADM4850 / ADM4851 / ADM4852 / ADM4853 are half-duplex transceivers that share differential lines and have separate enable inputs for the driver and receiver. The full duplex ADM4854 / ADM4855 / ADM4856 / ADM4857 transceivers have dedicated differential line driver outputs and receiver inputs. The devices have a 1/8-unit load receiver input impedance, which allows up to 256 transceivers on one bus. Because only one driver must be enabled at any time, the output of a disabled or powered down driver is three-stated to avoid overloading the bus. The receiver inputs have a true fail-safe feature, which ensures a logic high output level when the inputs are open or shorted. This guarantees that the receiver outputs are in a known state before communication begins and when communication ends. The driver outputs are slew rate limited to reduce EMI and data errors caused by reflections from improperly terminated buses. Excessive power dissipation caused by bus contention or by output shorting is prevented with a thermal shutdown circuit. The devices are fully specified over the commercial and industrial temperature ranges and are available in 8-lead SOIC (ADM4850 through ADM4857), 8-lead LFCSP (ADM4850 / ADM4852 / ADM4853), and 8-lead MSOP (ADM4850 only) packages. Applications Low power RS-485 applications EMI sensitive systems DTE to DCE interfaces Industrial control Packet switching Local area networks Level translators
***et
Single Transmitter/Receiver RS-422/RS-485 8-Pin SOIC N
***S.I.T. Europe - USA - Asia
Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
***log Devices
The ADM1485 is a differential line transceiver suitable for high speed bidirectional data communication on multipoint bus transmission lines. It is designed for balanced data transmission and complies with both EIA Standards RS-485 and RS-422. The part contains a differential line driver and a differential line receiver. Both the driver and the receiver may be enabled independently. When disabled, the outputs are tristated. The ADM1485 operates from a single +5 V power supply. Excessive power dissipation caused by bus contention or by output shorting is prevented by a thermal shutdown circuit. This feature forces the driver output into a high impedance state if during fault conditions a significant temperature increase is detected in the internal driver circuitry. Up to 32 transceivers may be connected simultaneously on a bus, but only one driver should be enabled at any time. It is important therefore that the remaining disabled drivers do not load the bus. To ensure this, the ADM1485 driver features high output impedance when disabled and also when powered down. This minimizes the loading effect when the transceiver is not being utilized. The high impedance driver output is maintained over the entire common-mode voltage range from -7 V to +12 V. The receiver contains a fail safe feature which results in a logic high output state if the inputs are unconnected (floating). The ADM1485 is fabricated in BiCMOS, an advanced mixed technology process combining low power CMOS with fast switching bipolar technology. All inputs and outputs contain protection against ESD; all driver outputs feature high source and sink current capability. An epitaxial layer is used to guard against latch-up. The ADM1485 features extremely fast switching speeds. Minimal driver propagation delays permit transmission at data rates up to 30 Mbits/s while low skew minimizes EMI interference. The part is fully specified over the commercial and industrial temperature range and is available in an 8-pin DIL/SOIC package.
***as Instruments
Low Power S-485/1/4 Unit Load Multipoint Transceiver 8-SOIC 0 to 70
***et
Single Transmitter/Receiver RS-422/RS-485 8-Pin SOIC N T/R
***ark
Ic,Line Transceiver,Cmos,1 Driver,1 Rcvr,Sop,8Pin,Plastic
***inecomponents.com
LOW PWR 485 XCVR 1/4 UNIT LOAD
***as Instruments
Low Power Multipoint TIA/EIA-485 Transceiver 8-SOIC 0 to 70
***et
Single Transmitter/Receiver RS-422/RS-485 8-Pin SOIC N T/R
***eco
IC,DS36C278TMX/NOPB,CMOS RS-48 5 TRANSCEIVER SOIC
***ark
Ic,Line Transceiver,Cmos,1 Driver,1 Rcvr,Sop,8Pin,Plastic
***sener Electronics
IC TXRX LO PWR TIA/EIA-485 8SOIC
***i-Key
LINE TRANSCEIVER, 1 FUNC, 1 DRIV
부분 # 제조 설명 재고 가격
ADM485JR-REELAnalog Devices IncLine Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
RoHS: Not Compliant		52955
  • 1000:$2.3500
  • 500:$2.4800
  • 100:$2.5800
  • 25:$2.6900
  • 1:$2.9000
ADM485JR-REEL7Analog Devices IncLine Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
RoHS: Not Compliant		34990
  • 1000:$1.4000
  • 500:$1.4700
  • 100:$1.5300
  • 25:$1.6000
  • 1:$1.7200
ADM485JR-REELAnalog Devices Inc 1488
  • 809:$2.2500
  • 361:$2.4750
  • 1:$4.5000
ADM485JR-REELAnalog Devices Inc 165
  • 70:$3.3485
  • 20:$3.6200
  • 1:$5.4300
ADM485JR-REELAnalog Devices IncINSTOCK2415
    ADM485JR-REELAnalog Devices IncINSTOCK24880
      영상 부분 # 설명
      ADM485EARZ

      Mfr.#: ADM485EARZ

      OMO.#: OMO-ADM485EARZ

      		 RS-422/RS-485 Interface IC 5V 15kV ESD Half Duplex 2.5Mbps
      ADM4851ARZREEL7

      Mfr.#: ADM4851ARZREEL7

      OMO.#: OMO-ADM4851ARZREEL7-1190

      		 Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8
      ADM485ARZREEL

      Mfr.#: ADM485ARZREEL

      OMO.#: OMO-ADM485ARZREEL-1190

      		 Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
      ADM485JRZ-REEL

      Mfr.#: ADM485JRZ-REEL

      OMO.#: OMO-ADM485JRZ-REEL-ANALOG-DEVICES

      		 신규 및 오리지널
      ADM485ARMZ-REEL7

      Mfr.#: ADM485ARMZ-REEL7

      OMO.#: OMO-ADM485ARMZ-REEL7-ANALOG-DEVICES-INC-ADI

      		 RS-422/RS-485 Interface IC 5V Low Pwr 5Mbps Half Duplex
      ADM4857ARZ-REEL7

      Mfr.#: ADM4857ARZ-REEL7

      OMO.#: OMO-ADM4857ARZ-REEL7-ANALOG-DEVICES-INC-ADI

      		 RS-422/RS-485 Interface IC 10MBps Full Duplex 5V RS485 Trans. I.C.
      ADM4852AR

      Mfr.#: ADM4852AR

      OMO.#: OMO-ADM4852AR-1190

      		 Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
      ADM4854AR

      Mfr.#: ADM4854AR

      OMO.#: OMO-ADM4854AR-1190

      		 Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8
      ADM4855ARZ-REEL

      Mfr.#: ADM4855ARZ-REEL

      OMO.#: OMO-ADM4855ARZ-REEL-1190

      		 신규 및 오리지널
      ADM485ARM

      Mfr.#: ADM485ARM

      OMO.#: OMO-ADM485ARM-1190

      		 Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
      유효성
      재고:
      Available
      주문 시:
      4000
      수량 입력:
      ADM485JR-REEL의 현재 가격은 참고용이며 최상의 가격을 원하시면 판매팀 [email protected]으로 문의 또는 다이렉트 이메일을 보내주십시오.
      참고 가격(USD)
      수량
      단가
      내선 가격
      1
      US$3.38
      US$3.38
      10
      US$3.21
      US$32.06
      100
      US$3.04
      US$303.75
      500
      US$2.87
      US$1 434.40
      1000
      US$2.70
      US$2 700.00
      시작
      최신 제품
      • L-Series Magnetic Switches
        L-Series Magnetic Switches
        The L-series from Magnasphere offers remarkable ferrous-metal proximity sensing. Unlike typical reed switch devices, they need no magnet actuator.
      • Magi³C-FISM Fixed Isolated SIP Module
        Magi³C-FISM Fixed Isolated SIP Module
        Würth Elektronik's MagI³C-FISM 1 W functional isolated DC/DC converter features an Isolation voltage of 2 kV.
      • REC20 and RES20 Optical Encoders
        REC20 and RES20 Optical Encoders
        Nidec Copal Electronics' REC20 and RES20 optical encoders are for use in applications that require manual setting and are available in multiple resolution options.
      • BMM150 Geomagnetic Sensors
        BMM150 Geomagnetic Sensors
        Bosch’s BMM150 is a low-power and low-noise 3-axis digital geomagnetic sensor to be used in compass applications.
      • Ultra-Low Dropout Voltage LDO
        Ultra-Low Dropout Voltage LDO
        Toshiba's TCR series are compactly packaged LDOs that offer high performance and low noise making them ideal for small form-factor applications.
      More Newest Products
      Top