Semtech's SX9510 touch sensor controller includes 8-channels of LED drivers, a buzzer, IR detector and analog outputs designed ideally for TV applications.
By Semtech 343
Semtech's SX9300 is the world’s first dual-channel capacitive Specific Absorption Rate (SAR) controller.
By Semtech 360
Semtech's SX8633 is an ultra low power, fully integrated 12-channel solution for capacitive touch-buttons, and proximity detection applications.
By Semtech 422
EcoSpeed DC-DC converters help designers meet today’s demanding "green" power requirements .
By Semtech 328
Semtech's TS30013 are 3A DC/DC synchronous switching regulator with fully integrated power switches, internal compensation, and full fault protection.
By Semtech 154
Semtech’s TS51111 includes a high efficiency synchronous rectifier to convert the input AC power signal to a DC output level for battery charging. The device supports both direct battery charging
By Semtech 357
Semtech's TS80002 is a power transmitter communications and control unit for wireless charging applications.
By Semtech 342
Semtech’s GS12070 is a highly configurable UHD-SDI gearbox with four inputs and four outputs which supports conversions between multi-link, dual-link, and single-link UHD-SDI interfaces.
By Semtech 390
Semtech’s TS13401 is a galvanically isolated, 60 V power FET driver with bi-directional blocking.
By Semtech 294
Semtech’s SC431MSKQTRT adjustable shunt regulator offers a wide operating current range 130 µA to 150 mA.
By Semtech 363
SX1272 features LoRa from Semtech which provides ultra-long-range spread spectrum communication.
By Semtech 984
Long transceiver LoRa™ also provides significant advantages in both blocking and selectivity over conventional modulation techniques.
By Semtech 395
Semtech's SX1261 and SX1262 devices are designed for long-range wireless applications and support long battery life.
By Semtech 368
Semtech's RailClamp®0554S is designed to protect sensitive components connected to ESD, EFT and lightning.
By Semtech 398
Semtech’s RClamp®1255P provides dedicated surge and ESD protection for µUSB ports. It is designed to replace multiple discrete components in portable applications.
By Semtech 501
Semtech’s RailClamp TVS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines.
By Semtech 429
Semtech's RClamp®0512TQ TVS diode offers a working voltage of 5 V with a low capacitance of 3 pF.
By Semtech 407
Semtech's LinkCharge is a complete, self-contained infrastructure wireless charging system that can be mounted underneath almost any non-metallic surface.
By Semtech 351
Semtech offers state of the art transient voltage suppression (TVS) protection solutions to help protect USB 3.0 ICs from dangerous fast rise-time transient threats while also presenting sufficien
By Semtech 451
Semtech’s RCLAMP0504FBTCT is a RClamp® TVS diodes that is designed to protect sensitive electronics from damage and latch-up due to a transient surge event.
By Semtech 436