Broadcom's AC input half-pitch phototransistor optocouplers contain two light-emitting diodes connected inversely parallel and optically coupled to a phototransistor.
By Broadcom Limited 50
Broadcom's ACPL-352J device features common mode transient immunity (CMTI) greater than 50 kV/μs and provides minimal propagation delay with excellent timing skew.
By Broadcom Limited 90
Broadcom's ACNU-3410 (3 A) and ACNU-3430 (5 A) are gate drive optocoupler devices in the 11 mm SSO-8 package designed for high voltage.
By Broadcom Limited 72
These Broadcom devices are optimized for low power systems supporting data rates up to 1 MBd (ACFL-5211T) and 15 MBd (ACFL-6211T), and packaged in a compact SSO-12 package comparable to the SSO-8
By Broadcom Limited 83
Broadcom BCM89200 is part of a family of products that provide optimal solutions for key automotive designs that have high-performance yet challenging low-power requirements.
By Broadcom Limited 61
Broadcom's BCM89501 device is a fully integrated BroadR-Reach multilayer switch that supports automotive qualification (AECQ100) for in-car networking applications.
By Broadcom Limited 78
Broadcom's BCM89810 automotive Ethernet transceiver performs all of the physical layer functions for BroadR-Reach encoded Ethernet packets over single-pair unshielded twisted-pair copper wire,
By Broadcom Limited 82
Broadcom's ACPL-W346 gate drive optocoupler is ideally suited for driving power and SiC MOSFETs used in inverter or AC-DC/DC-DC converter applications.
By Broadcom Limited 50
Broadcom's ACPL-W349 optocoupler is ideally suited for driving SiC/GaN (silicon carbide/gallium nitride) MOSFETs & IGBTs used in power conversion applications.
By Broadcom Limited 99
Broadcom's automotive isolation amplifiers designed for high-precision DC voltage sensing operate with a full span of analog input voltages up to 2.46 V.
By Broadcom Limited 85
Broadcom’s ACPL-C740 optically isolated sigma-delta modulator operates from a 5 V power supply with dynamic range of 86 dB with an appropriate digital filter.
By Broadcom Limited 59
Broadcom's ACPL-302J 2.5 A gate drive optocoupler driving IGBTs and power MOSFETs are used in motor control and inverter applications.
By Broadcom Limited 464
Broadcom's ACNT optocouplers are able to achieve 2,262 VPEAK insulation working voltage in a stretched compact SO-8 package.
By Broadcom Limited 78
Broadcom's ACNT-H343 optocoupler is designed for high voltage, space-constrained industrial applications.
By Broadcom Limited 78
Broadcom's MGA-311xx high gain MMIC driver amplifiers offer excellent uniformity in product specification in a SOT-89 standard package.
By Broadcom Limited 68
Broadcom’s small cell power amplifiers are fully matched power amplifiers for use in the 1.93~1.995 GHz band, 2.62~2.69 GHz band, and 925~960 MHz band.
By Broadcom Limited 58
The integrated receiver output of the AFBR-3905xxRZ series is compatible with TTL logic families and operates with any type of signal from DC up to 5 MBd while the AFBR-3950xxRZ series operates wi
By Broadcom Limited 448
Broadcom's transmitter consists of a 650 nm LED, which is controlled by a fully integrated driver IC. The The LED driver operates at 3.3 V. It receives LVDS electrical input, and converts it i
By Broadcom Limited 84
Broadcom's AFBR-57E6APZ-HT is a low power, 125MBd small form-factor pluggable (SFP) fiber optic transceiver module device and AFBR-59E4APZ-HT is a low power, small form factor (SFF) Fast Ether
By Broadcom Limited 52
Broadcom's AFBR-2529SIZ features a monitor output providing an analog voltage proportional to the average optical input power.
By Broadcom Limited 89