The LTM2893 and LTM2895 are high-speed, isolated μModule (micromodule) SPI interfaces from Linear Technology with ADC control signals.
By Analog Devices Inc 685
The ISO772x device can be used with Texas Instruments' mixed signal microcontroller, digital-to-analog converter, transformer driver, and voltage regulator.
By Texas Instruments 954
Broadcom's ACPL-217, 227 and 247 DC input half-pitch phototransistor optocouplers contain two light-emitting diodes connected inversely parallel and optically coupled to a phototransistor.
By Broadcom Limited 1236
Broadcom's AC input half-pitch phototransistor optocouplers contain two light-emitting diodes connected inversely parallel and optically coupled to a phototransistor.
By Broadcom Limited 714
Texas Instruments' ISO7830 device is a high-performance, triple-channel digital isolator with 5.7 kVRMS isolation voltage.
By Texas Instruments 728
Broadcom's HCPL-90xx and HCPL-09xx CMOS digital isolators feature high speed performance and excellent transient immunity specifications.
By Broadcom Corporation 1391
Analog Devices’ ADUM1201 dual channel, micropower digital isolators provide 3 kV isolation to protect the circuit downstream.
By Analog Devices Inc 746
Analog Devices’ ADM2582/ADM2587 transceivers can be configurable as half or full duplex. Both devices are perfect for isolated transceiver applications found in telecommunication, networks, and in
By Analog Devices Inc 663
Analog Devices’ ADM3251/ADM3252 transceivers uses isoPower™ technology as well as iCoupler® technology and have isolated protection up to 2.5k volts. They both support data rates of 460 kbps.
By Analog Devices Inc 664
Murata's NM485D6S5MC and NMTTLD6S5MC low power isolated data communication devices that provide RS485 or TTL interfaces with isolated power for medical safety approval purposes.
By Murata Power Solutions Inc 1296
Broadcom's ACPL-352J device features common mode transient immunity (CMTI) greater than 50 kV/μs and provides minimal propagation delay with excellent timing skew.
By Broadcom Limited 1163
ADI’s ADUM1250/ADUM1251 are dual digital hotswap isolators with unidirectional and birectional I2C communication.
By Analog Devices Inc 718
Broadcom's ACNU-3410 (3 A) and ACNU-3430 (5 A) are gate drive optocoupler devices in the 11 mm SSO-8 package designed for high voltage.
By Broadcom Limited 1049
Texas Instruments' UCC20225 is a flexible dual gate driver which can be configured to fit a variety of power supply and motor drive topologies.
By Texas Instruments 632
These Broadcom devices are optimized for low power systems supporting data rates up to 1 MBd (ACFL-5211T) and 15 MBd (ACFL-6211T), and packaged in a compact SSO-12 package comparable to the SSO-8
By Broadcom Limited 933
The first single- and multi-line devices from Nexperia's TrEOS protection family deliver benchmark performance in all three key parameters.
By Nexperia 1530
Texas Instruments' ISOW784x family of devices comprises a high-efficiency, low-emissions isolated DC-DC converter and four high-speed isolated data channels.
By Texas Instruments 710
Texas Instruments' UCC53x0 family of isolated gate drivers with variations for built-in split output, Miller clamp, and UVLO2 referenced to GND2.
By Texas Instruments 882
Analog Device's single channel drivers with iCoupler® technology for 2 A of isolated current.
By Analog Devices Inc 371
Power Integrations' SCALE-iDriver family of gate driver ICs are single-channel IGBT and MOSFET drivers in a standard eSOP package.
By Power Integrations 1944