Panasonic's ECW-FG series metalized polypropylene film capacitors offer flame-resistant coating and are highly recommended for DC/DC and AC/DC circuits.
By Panasonic 1139
Panasonic's ECQ-UA series metalized polypropylene film capacitors offer high humidity resistance and are ideal in automotive applications.
By Panasonic 1141
Panasonic's EEH-ZF series through-hole mount conductive polymer aluminum electrolytic capacitors are AEC-Q200 and RoHS compliant.
By Panasonic 1230
Vishay's HVCC series capacitors eliminate the need to utilize two 1 nF capacitors in parallel to reach values of 2 nF.
By Vishay/BCcomponents 1778
TDK’s CA series mega cap stacks up to three MLCCs horizontally, offering higher capacitance in a single component.
By TDK Corporation 950
TDK’s TFM-ALVA series thin-film power inductors feature high withstand voltage (40 V) for ADAS applications.
By TDK Corporation 843
Nidec Copal Electronics' M series wirewound potentiometers are available with three, five, or ten turns and utilize precision wire-winding technology.
By Nidec Copal Electronics 1190
Bourns' CRK series metal strip wide terminal resistors are ideal for current sensing in consumer and telecom electronics and industrial automation applications.
By Bourns Inc. 1215
Wurth Electronics' WE-HCFT series features up to 200% higher current capability than the WE-HCF 2815 series.
By Würth Elektronik 858
The API Delevan HRSPD127 series of fixed inductors has magnetic shielding, low DRC, and excellent handling capabilities for high-reliability applications.
By API Delevan Inc 1411
Susumu's RGT series metal thin-film chip resistors are ideal for applications that require high temperature such as automotive, aerospace, and industrial.
By Susumu 2864
IDT's XA series of automotive oscillators are precision crystal oscillators with 750 fs to 890 fs typical phase jitter over 12 kHz to 20 MHz bandwidth.
By IDT, Integrated Device Technology Inc 824
Maxwell’s 3 volt ultracapacitor cells are designed to provide energy storage in support of the latest trends in renewable energy, smart grid, and IoT.
By Maxwell Technologies Inc 2206
Tecate's 3 V TPLH series offers a low-ESR solution for high-power applications with cell values ranging from 100 F to 450 F.
By Tecate Group 1121
Vishay Dale’s WSBS and WSBM current sense resistors feature tapped holes option to aid in PCB mounting, a location to attach voltage sense pins, or both.
By Vishay/Dale 1775
Tecate's TPLH series of ultracapacitors range in value from 1.5 F to 120 F and are UL recognized and RoHS and REACH compliant.
By Tecate Group 1277
IDT's ProXO series quartz-based PLL oscillators focus on noise reduction technologies.
By IDT, Integrated Device Technology Inc 880
The B32354S3 series of AC filter capacitors from TDK Corporation (EPCOS) are UL 810 approved at the component level and carry the CE mark.
By EPCOS 1192
Vishay's high-quality metal case resistors (MCRs) with high power-to-size ratio and all-welded construction are fully potted in a flameproof inorganic compound.
By Vishay/Dale 1568
ECS' ECS-5032MV SMD, low-power, MultiVolt crystal oscillators are designed for applications such as IoT, industrial, and wireless devices.
By ECS Inc 1290