Texas Instruments' MSP430FR2422 mixed signal microcontrollers are for sensing and measurement applications.
By Texas Instruments 961
Texas Instruments' TLV906x are low-power, 10 MHz, rail-to-rail input and output (RRIO), CMOS operational amplifiers in micro size packages.
By Texas Instruments 702
Texas Instruments' OPA207 precision operational amplifier is specified for operation from 4.5 V to 36 V (±2.25 V to ±18 V).
By Texas Instruments 903
Texas Instruments' MSP430FR25x2 ultra-low-power MCUs are FRAM-based MCUs with integrated high performance charge-transfer CapTIvate™ technology.
By Texas Instruments 741
Texas Instruments' UCC24612 synchronous rectifier (SR) controllers use drain-to-source voltage sensing to determine the SR MOSFET conduction interval.
By Texas Instruments 637
Texas Instruments' THS3491 is a high-voltage, low-distortion, high-speed, current-feedback amplifier operates over a wide supply range of ±7 V to ±16 V.
By Texas Instruments 619
Texas Instruments' TLV7011 and TLV7021 devices are single-channel, micro-power comparators with push-pull and open-drain outputs.
By Texas Instruments 661
Texas Instruments' ADS122C04 is a 24-bit, ΔΣ ADC that offers features to reduce system cost and component count in applications measuring small sensor signals.
By Texas Instruments 850
Texas Instruments' bq25910 is an integrated three-level switch-mode parallel battery charge management device for single cell Li-ion and Li-polymer batteries.
By Texas Instruments 823
Texas Instruments' LMR23615 SIMPLE SWITCHER® regulators are easy-to-use synchronous step-down DC-DC converters operating from a 4 V to 36 V supply voltage.
By Texas Instruments 593
Texas Instruments' bq25970YFFT dual-phase architecture reduces the input cap requirements as well as reducing the output voltage ripple.
By Texas Instruments 629
Texas Instruments' TPS7A80 family of low-dropout linear regulators (LDOs) offer very high power-supply ripple rejection (PSRR) at the output.
By Texas Instruments 577
Texas Instruments' LMR33630 SIMPLE SWITCHER® regulator is an easy-to-use, synchronous, step-down DC/DC converter that delivers best-in-class efficiency for rugged industrial applications.
By Texas Instruments 403
Texas Instruments' SN74AUP1G126 device is an output-enabled CMOS buffer that can be used in LED indicator applications that require low-power.
By Texas Instruments 764
Texas Instruments' SN74AUP1G06 connects to other open-drain outputs to implement active-low wired-OR or active-high wired-AND function.
By Texas Instruments 712
Texas Instruments' INA1620 integrates a dual, bipolar-input, audio operational amplifier with four high-precision thin-film resistor arrays on the same die.
By Texas Instruments 1557
TI's TUSB1044 is a USB Type-C™ alt mode redriver switch that supports data rates up to 8.1 Gbps and implements 5th generation USB redriver technology.
By Texas Instruments 830
Texas Instruments' TUSB564 switch supports USB 3.1 data rates up to 5 Gbps and DisplayPort 1.4 up to 8.1 Gbps for upstream facing port (sink).
By Texas Instruments 603
Texas Instruments' DRV10974 BLDC motor driver is high-performance, flexible, and a simple solution for appliance fan, pump, and blower applications.
By Texas Instruments 841
Texas Instruments' INA4180 quad-channel amplifies voltage developed across current-sensing resistor as current flows through the resistor to the load or ground.
By Texas Instruments 913